Alcatel-Lucent 7450 Basic System Configuration Manual page 530

Show, Clear, Debug, and Tools Command Reference
===============================================================================
The following system example shows:
Note: The following output applies only to the 7750 SR-1e/2e/3e and 7950 XRS-16/20/40 platforms.
---------------------------------------------------------------------------
*A:Dut-B# show system sync-if-timing standby or show system sync-if-timing "B"
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM B
Reference Order
Reference Mate CPM
Reference Input 1
Reference Input 2
Reference BITS A
530
Framing
Line Coding
SSM Bit
Output Admin Status
Output Source
Output Reference Selected
Tx Quality Level
• sync-if timing standby, or
• sync-if-timing "B" when the SETS reference on the standby CPM-B locks to Mate CPM
(BITS A), or
• sync-if-timing "A" when the SETS reference on the standby CPM-A locks to Mate CPM
(BITS A)
Reference Input Mode
Quality Level Selection
Reference Selected
System Quality Level
Current Frequency Offset (ppm) : +0sync-if-timing "A
Qualified For Use
Selected For Use
Admin Status
Rx Quality Level
Quality Level Override
Qualified For Use
Selected For Use
Not Selected Due To
Source Port
Admin Status
Rx Quality Level
Quality Level Override
Qualified For Use
Selected For Use
Not Selected Due To
Source Port
Input Admin Status
Rx Quality Level
: PCM31 CRC
: HDB3
: 8
: up
: line reference
: ref1
: prc
: Master Locked
: Revertive
: Disabled
: Mate CPM (BITS A)
: prc
: bits ref1 ref2
: Yes
: Yes
: up
: prc
: none
: Yes
: No
: on standby
: 1/1/5
: up
: prc
: none
: Yes
: No
: on standby
: 3/1/5
: up
: prc
Basic System Configuration Guide