File Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

Parameters cflash-id — Specifies the compact flash slot ID to be shut down or enabled. If cflash-id is
active — If active is selected, then all drives on the active CPM are shutdown or enabled.
standby — If standby is selected, then all drives on the standby CPM are shutdown or enabled.

File Commands

attrib
Syntax attrib [+r | -r] file-url
attrib
Context file
Description
This command sets or clears/resets the read-only attribute for a file in the local file system. To list all
files and their current attributes enter attrib or attrib x where x is either the filename or a wildcard (*).
When an attrib command is entered to list a specific file or all files in a directory, the file's attributes
are displayed with or without an "R" preceding the filename. The "R" implies that the +r is set and that
the file is read-only. Files without the "R" designation implies that the -r is set and that the file is read-
write-all. For example:
ALA-1>file cf3:\ # attrib
cf3:\bootlog.txt
cf3:\bof.cfg
cf3:\boot.ldr
cf3:\sr1.cfg
cf3:\test
cf3:\bootlog_prev.txt
cf3:\BOF.SAV
Parameters
file-url — The URL for the local file.
Basic System Configuration Guide
specified, the drive is shut down or enabled. If no cflash-id is specified, the drive referred to
by the current working directory is assumed. If a slot number is not specified, then the active
CPM/CFM is assumed.
Default
The current compact flash device
Values cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
When both active and standby keywords are specified, then all drives on both CPM are
shutdown.
Values
local-url | remote-url
local-url
remote-url
cf1:,cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
255 chars max
[cflash-id/][file-path]
[ftp://login:pswd@remote-locn/][file-path]
File System Management
181