Saving Configurations; Specifying Post-Boot Configuration Files - Alcatel-Lucent 7450 Basic System Configuration Manual

Administrative Tasks
Hardware Data
-------------------------------------------------------------------------------
Environment Information
...
===============================================================================
*A:ALA-48#

Saving Configurations

Whenever configuration changes are made, the modified configuration must be saved so they
will not be lost when the system is rebooted.
Configuration files are saved by executing explicit command syntax which includes the file
URL location to save the configuration file as well as options to save both default and non-
default configuration parameters. Boot option file (BOF) parameters specify where the
system should search for configuration and image files as well as other operational
parameters during system initialization.
For more information about boot option files, refer to

Specifying Post-Boot Configuration Files

Two post-boot configuration extension files are supported and are triggered when either a
successful or failed boot configuration file is processed. The boot-bad-exec and boot-good-
exec commands specify URLs for the CLI scripts to be run following the completion of the
boot-up configuration. A URL must be specified or no action is taken.
For example, after a configuration file is successfully loaded, the specified URL can contain
a nearly identical configuration file with certain commands enabled or disabled, or particular
parameters specified and according to the script which loads that file.
284
Base MAC address
Admin chassis mode
Oper chassis mode
Part number
CLEI code
Serial number
Manufacture date
Manufacturing string
Manufacturing deviations
Time of last boot
Current alarm state
: 14:30:ff:00:00:00
: d
: d
: Sim Part#
: Sim CLEI
: sim48
: 01012003
: Sim MfgString sim48
: Sim MfgDeviation sim48
: 2007/09/24 08:15:17
: alarm cleared
Boot Options.
Basic System Configuration Guide