Alcatel-Lucent 7450 Basic System Configuration Manual page 498

Show, Clear, Debug, and Tools Command Reference
Description This command enables the context to show redundancy information.
mgmt-ethernet
Syntax mgmt-ethernet
Context show>redundancy
Description
This command shows the management Ethernet port redundancy status. The show router
"management" interface command also shows the CPM Ethernet port used by the management
interface. If the primary CPM's port is active, then it shows "A/1" under the Port field,. If the
secondary CPM's port is active, then it shows "B/1 -> A/1"in the Port field.
This feature is not supported on 7750 SR-a, 7750 SR-c or VSR platforms.
Output Show Redundancy Mgmt-Ethernet Output
The following table describes the Redundancy Mgmt-Ethernet fields:
Sample Output
A:SR12# show redundancy mgmt-ethernet
===============================================================================
Management Ethernet Redundancy
===============================================================================
Admin Status
Oper Status
Revert Time
===============================================================================
Show Router "Management" Interface Detail Output
The following is a sample output that shows "A/1" when the primary CPM's Ethernet port is active
and "B/1 ->A/1" if the secondary CPM's port is active.
*B:Dut-A# show router "management" interface
===========================================================================
Interface Table (Router: management)
===========================================================================
498
Table 55: Redundancy Mgmt-ethernet Field Descriptions
Label
Admin Status
Oper Status
Revert Time
: Enabled
: Management port operating on active CPM
: 5 seconds
Description
Enabled — Administrative status is enabled.
Disabled — Administratively disabled.
Displays the CPM on which the management Ethernet port is operating.
Displays the revert time.
Basic System Configuration Guide