Alcatel-Lucent 7450 Basic System Configuration Manual page 147

repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the absolute rate-per-second value for each
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
Output
Sample Output
A:ALA-12# monitor service id 100 sdp 10 repeat 3
===============================================================================
Monitor statistics for Service 100 SDP binding 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
I. Fwd. Pkts.
E. Fwd. Pkts.
-------------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts.
E. Fwd. Pkts.
-------------------------------------------------------------------------------
At time t = 22 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts.
E. Fwd. Pkts.
-------------------------------------------------------------------------------
At time t = 33 sec (Mode: Delta)
-------------------------------------------------------------------------------
I. Fwd. Pkts.
E. Fwd. Pkts.
===============================================================================
A:ALA-12#
vrrp
Syntax vrrp
Context monitor>router
Description
This command enables the context to configure criteria to monitor VRRP statistical information for a
VRRP enabled on a specific interface.
Basic System Configuration Guide
Default
10
Values 1 to 999
statistic is displayed.
instead of the delta.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
I. Dro. Pkts. : 0
E. Fwd. Octets : 0
I. Dro. Pkts. : 0
E. Fwd. Octets : 0
I. Dro. Pkts. : 0
E. Fwd. Octets : 0
I. Dro. Pkts. : 0
E. Fwd. Octets : 0
CLI Usage
147