Alcatel-Lucent 7450 Basic System Configuration Manual page 496

Show, Clear, Debug, and Tools Command Reference
Description
Event Id
=================================================================
time
Syntax time
Context show>system
Description
This command displays the system time and zone configuration parameters.
Output The following table describes system time output fields.
Sample Output
A:ALA-1# show system time
===============================================================================
496
: TiMOS CLI - cflash capacity alarm falling
event using percentages : value=0, <=50 :
alarm-index 4, event-index 6 alarm-variable
OID tmnxCpmFlashPercentageUsed.1.10.2
: 6
Table 54: System Time Field Descriptions
Label
Date & Time
DST Active
Zone
Current Time Zone
Zone type
Offset from UTC
Offset from Non-DST
Starts
Ends
Time Sent : 07/23/2015 18:15:46
Description
The system date and time using the current time zone.
Yes — Daylight Savings Time is currently in effect.
No — Daylight Savings Time is not currently in effect.
The zone names for the current zone, the non-DST zone, and the DST
zone if configured.
Indicates the process currently controlling the system time. SNTP, NTP,
PTP or NONE.
Non-standard — The zone is user-defined.
Standard — The zone is system defined.
The number of hours and minutes added to universal time for the zone,
including the DST offset for a DST zone.
The number of hours (always 0) and minutes (0 to 60) added to the time
at the beginning of Daylight Saving Time and subtracted at the end
Daylight Saving Time.
The date and time Daylight Saving Time begins.
The date and time Daylight Saving Time ends.
Basic System Configuration Guide