Configuring Synchronization; Configuring Manual Synchronization; Forcing A Switchover - Alcatel-Lucent 7450 Basic System Configuration Manual

Configuring Synchronization

The switchover-exec command specifies the location and name of the CLI script file
executed following a redundancy switchover from the previously active CPM card.
CLI Syntax:

Configuring Manual Synchronization

Note that automatic synchronization can be configured in the config>system>
synchronization context.
CLI Syntax:
Example:
The following shows the output which displays during a manual synchronization:
A:ALA-12>admin# synchronize config
Syncing configuration......
Syncing configuration.....Completed.
A:ALA-12#

Forcing a Switchover

The force-switchover now command forces an immediate switchover to the standby CPM
card.
CLI Syntax:
Example:
A:ALA-12# admin redundancy force-switchover now
A:ALA-12#
Resetting...
Basic System Configuration Guide
admin>redundancy
synchronize {boot-env|config}
config>system
switchover-exec file-url
admin
redundancy
synchronize {boot-env|config}
admin>redundancy# synchronize config
admin>redundancy
force-switchover [now]
admin>redundancy# force-switchover now
System Management
307