Alcatel-Lucent 7450 Basic System Configuration Manual page 172

The File System
Example:
As in a DOS file system, the wildcard characters can only be used in some of the file
commands.
Another example of wildcard usage:
A:21# show router mpls lsp l-63-8*
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name
Adm
Config
-------------------------------------------------------------------------------
l-63-8-cc
Up
l-63-8-cw
Up
-------------------------------------------------------------------------------
LSPs : 2
===============================================================================
A:21#
All the commands can operate on the local file system.
also support remote file operations.
172
A:ALA-1>file cf3:\ # copy test*.cfg
siliconvalleycf1:\testfile.cfg
1 file(s) copied.
A:ALA-1>file cf3:\ # cd siliconvalley
A:ALA-1>file cf3:\siliconvalley\ # dir
Volume in drive cf1 on slot A has no label.
Directory of cf3:\siliconvalley\
05/10/2006 11:32p
11:14p
05/10/2006 11:32p
1 File(s)
2 Dir(s)
A:ALA-1>file cf3:\siliconvalley\ #
Opr
Dwn
Dwn
Table 25: File Command Local and Remote File System Support
Command
attrib
cd
copy
delete
dir
<DIR>
<DIR>
1082368 bytes free.
To
213.224.245.8
213.224.245.8
local-url ftp-url
X
X X
X X
X X
X X
Basic System Configuration Guide
.05/10/2006
..
7597 testfile.cfg
7597 bytes.
Fastfail
No
No
Table 25 indicates which commands
tftp-url
X