Alcatel-Lucent 7450 Basic System Configuration Manual page 87

Description This command displays monitor command statistics for MAC filter entries.
Parameters
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
filter
Syntax filter
Context monitor
Description This command enables the context to configure criteria to monitor IP and MAC filter statistics.
ip
Syntax ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
Description This command enables IP filter monitoring. The statistical information for the specified IP filter entry
displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IP filter. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Basic System Configuration Guide
only.
Values
1 to 65535
Default
5 seconds
Values
3 to 60
Default
10
Values
1 to 999
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
CLI Usage
87