Alcatel-Lucent 7450 Basic System Configuration Manual page 534

Show, Clear, Debug, and Tools Command Reference
===============================================================================
synchronization
Syntax synchronization
Context show>redundancy>synchronization
Description
This command displays redundancy synchronization times.
Output The following table describes redundancy synchronization output fields.
Sample Output
A:ALA-1>show>redundancy# synchronization
===============================================================================
534
Output Admin Status
Output Source
Output Reference Selected
Tx Quality Level
Label
Standby Status
Last Standby Failure
Standby Up Time
Failover Time
Failover Reason
Boot/Config Sync
Mode
Boot/Config Sync
Status
Last Config File Sync
Time
Last Boot Env Sync
Time
: up
: line reference
: ref1
: prc
Table 71: Synchronization Output
Description
Displays the status of the standby CPM.
Displays the timestamp of the last standby failure.
Displays the length of time the standby CPM has been up.
Displays the timestamp when the last redundancy failover occurred
causing a switchover from active to standby CPM. If there is no redundant
CPM card in this system or no failover has occurred since the system last
booted, the value will be 0.
Displays a text string giving an explanation of the cause of the last
redundancy failover. If no failover has occurred, an empty string displays.
Displays the type of synchronization operation to perform between the
primary and secondary CPMs after a change has been made to the
configuration files or the boot environment information contained in the
boot options file (BOF).
Displays the results of the last synchronization operation between the
primary and secondary CPMs.
Displays the timestamp of the last successful synchronization of the
configuration files.
Displays the timestamp of the last successful synchronization of the boot
environment files.
Basic System Configuration Guide