Alcatel-Lucent 7450 Basic System Configuration Manual page 113

repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
subscriber
Syntax subscriber sub-ident-string [interval seconds] [repeat repeat] [absolute | rate] sap sap-id
sla-profile sla-profile-name
Context monitor>qos>scheduler-stats
Description This command monitors scheduler statistics for an SLA profile.
Parameters subscriber sub-ident-string — Specifies an existing subscriber a identification policy name.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
sap sap-id — Specify the physical port identifier portion of the SAP definition.
sla-profile sla-profile-name — Specifies the SLA profile belonging to the subscriber host.
router
Syntax router router-instance
Context monitor
Description
This command enables the context to configure criteria to monitor statistical information for a variety
of routing protocols.
Basic System Configuration Guide
Default
10
Values 1 to 999
processing. No calculations are performed on the delta or rate statistics.
Default
11 seconds
Values
11 to 60
Default
10
Values
1 to 999
processing. No calculations are performed on the delta or rate statistics.
CLI Usage
113