Alcatel-Lucent 7450 Basic System Configuration Manual page 412

System Command Reference
Parameters file-url — The file URL location to save the configuration file.
detail — Saves both default and non-default configuration parameters.
index — Forces a save of the persistent index file regardless of the persistent status in the BOF
enable-tech
Syntax [no] enable-tech
Context admin
Description
This command enables the shell and kernel commands.
radius-discovery
Syntax radius-discovery
Context admin
412
Default
The primary configuration file location.
Values
local-url | remote-url
local-url
remote-url
remote-locn
ipv4-address
ipv6-address
cflash-id
file. The index option can also be used to avoid an additional boot required while changing
your system to use the persistence indices.
Note: This command should only be used with authorized direction from the Alcatel-Lucent
Technical Assistance Center (TAC).
[cflash-id/][file-path] 200 chars max, including cflash-id
directory length 99 chars max each
[ftp://login:pswd@remote-locn/][file-path]
247 chars max
directory length 99 chars max each
[hostname | ipv4-address | "["ipv6-address"]" ]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|cf3:|cf3-A:|cf3-B:
Basic System Configuration Guide