Alcatel-Lucent 7450 Basic System Configuration Manual page 354

System Command Reference
software-repository
Syntax software-repository repository-name [create]
no software-repository repository-name
Context config>system
Description
This command creates or deletes an instance of a software repository. The instance is identified by a
repository name.
A software repository is used to obtain files to upgrade software on certain subsystems of the router
(for example, Ethernet satellites).
Up to three locations can be specified within a software repository for the router to access files in the
repository. The router will first attempt to access the file at the primary location. If the primary location
is not configured or the files are not found at the primary location, then the router will attempt to access
the files at the secondary location. If the secondary location is not configured or the files are not found
at the secondary location, then the router will attempt to access the files at the tertiary location. If the
tertiary location is not configured or the files are not found at the tertiary location, then the software
repository access will fail.
The no form of the command removes the software repository.
Parameters
repository-name — A string of up to 64 characters that uniquely identifies the software repository.
create — Keyword required when the software-repository context is first created. Once the
description
Syntax description description-string
no description
Context config>system>software-repository
Description This command defines a description string for the software repository.
The no form of the command deletes the associated description string.
Default
no description
Parameters
description-string — Software repository description string up to 80 characters in length.
primary-location
Syntax primary-location file-url
no primary-location
Context config>system>software-repository
354
context is created, it can be accessed without the create keyword.
Basic System Configuration Guide