Alcatel-Lucent 7450 Basic System Configuration Manual page 223

no primary-dns
Context bof
Description This command configures the primary DNS server used for DNS name resolution. DNS name
resolution can be used when executing ping, traceroute, and service-ping, and also when defining file
URLs. DNS name resolution is not supported when DNS names are embedded in configuration files.
The no form of the command removes the primary DNS server from the configuration.
Default
no primary-dns — No primary DNS server is configured.
Parameters
ip-address — The IP or IPv6 address of the primary DNS server.
secondary-dns
Syntax [no] secondary-dns ip-address
Context bof
Description
This command configures the secondary DNS server for DNS name resolution. The secondary DNS
server is used only if the primary DNS server does not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded in
configuration files.
The no form of the command removes the secondary DNS server from the configuration.
Default
no secondary-dns — No secondary DNS server is configured.
Parameters
ip-address — The IP or IPv6 address of the secondary DNS server.
Basic System Configuration Guide
Ipv6 is applicable to the 7750 SR and 7950 XRS only.
Values
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
interface
Ipv6 is applicable to the 7750 SR and 7950 XRS only.
Values
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0..FFFF]H
d: [0..255]D
32 chars max, for link local addresses
x:x:x:x:x:x:d.d.d.d[-interface]
Boot Options
223