Alcatel-Lucent 7450 Basic System Configuration Manual page 114

Basic CLI Command Reference
Parameters router-instance — Specify the router name or service ID.
neighbor
Syntax neighbor ip-address [ip-address...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
Context monitor>router>bgp
Description
This command displays statistical BGP neighbor information at the configured interval until the
configured count is reached. This command is supported on the 7750 SR and 7950 XRS.
The first screen displays the current statistics related to the specified neighbor(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
neighbor ip-address — Displays damping information for entries received from the BGP
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
Output
Sample Output
114
Values
router-name:
service-id:
Default
Base
neighbor. Up to 5 IP addresses can be specified.
Default 5 seconds
Values
3 to 60
Default
10
Values 1 to 999
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
Base, management
1 to 2147483647
Basic System Configuration Guide