Alcatel-Lucent 7450 Basic System Configuration Manual page 386

System Command Reference
CRON Commands
cron
Syntax cron
Context config
Description
This command creates the context to create scripts, script parameters and schedules which support the
Service Assurance Agent (SAA) functions.
CRON features are saved to the configuration file on both primary and backup control modules. If a
control module switchover occurs, CRON events are restored when the new configuration is loaded.
If a control module switchover occurs during the execution of a cron script, the failover behavior will
be determined by the contents of the script.
schedule
Syntax [no] schedule schedule-name [owner owner-name]
Context config>system>cron
Description
This command configures the type of schedule to run, including one-time only (oneshot), periodic or
calendar-based runs. All runs are determined by month, day of month or weekday, hour, minute and
interval (seconds).
The no form of the command removes the context from the configuration.
Default
none
Parameters schedule-name — Name of the schedule.
owner owner-name — Owner name of the schedule.
count
Syntax count number
no count
Context config>system>cron>sched
Description
This command configures the total number of times a CRON "interval" schedule is run. For example,
if the interval is set to 600 and the count is set to 4, the schedule runs 4 times at 600 second intervals.
386 Basic System Configuration Guide