Alcatel-Lucent 7450 Basic System Configuration Manual page 145

interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the absolute rate-per-second value for each
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
Output
Sample Output
*A:cses-A13# monitor service id 88
===============================================================================
Monitor statistics for Service 88 SAP 1/1/2:0
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Basic System Configuration Guide
Table 21: qtag values by port and encapsulation type (Continued)
Port Type Encap-Type
SONET/ IPCP
SDH
SONET/ BCP-Null
SDH
TDM
SONET/ BCP-Dot1q
SDH
TDM
SONET/ Frame Relay
SDH
TDM
SONET/ ATM
SDH
ATM
Default 11 seconds
Values
11 to 60
Default
10
Values 1 to 999
statistic is displayed.
instead of the delta.
Allowed Values
—
0
0 to 4094
16 to 991
vpi (NNI) 0 to 4095
vpi (UNI) 0 to 255
vci 1, 2, 5 to 65535
sap 1/1/2:0
Comments
The SAP is identified by the channel.
No BCP is deployed and all traffic is
IP.
The SAP is identified with a single
service on the channel. Tags are
assumed to be part of the customer
packet and not a service delimiter.
The SAP is identified by the 802.1Q
tag on the channel.
The SAP is identified by the data link
connection identifier (DLCI).
The SAP is identified by port or by
PVPC or PVCC identifier (vpi, vpi/
vci, or vpi range)
CLI Usage
145