Alcatel-Lucent 7450 Basic System Configuration Manual page 148

Basic CLI Command Reference
instance
Syntax instance interface interface-name vr-id virtual-router-id [interval seconds] [repeat repeat]
[absolute | rate]
Context monitor>router>vrrp
Description
Monitor statistics for a VRRP instance.
Parameters interface-name — The name of the existing IP interface on which VRRP is configured.
vr-id virtual-router-id — The virtual router ID for the existing IP interface, expressed as a
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
subscriber
Syntax subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [base | ingress-queue-
id ingress-queue-id | egress-queue-id egress-queue-id] [interval seconds] [repeat repeat]
[absolute | rate]
Context monitor>service
Description
This command monitors statistics for a subscriber.
Parameters
sub-ident-string — Specifies an existing subscriber identification profile to monitor.
sap sap-id — Specifies the physical port identifier portion of the SAP definition.
sla-profile sla-profile-name — Specifies an existing SLA profile.
interval seconds — Configures the interval for each display in seconds
148
decimal integer.
Default 5 seconds
Values
3 to 60
Default
10
Values 1 to 999
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
Values
dlci 16 to 1022
Default
11
Values
11 to 60
Basic System Configuration Guide