Alcatel-Lucent 7450 Basic System Configuration Manual page 409

disconnect
Syntax disconnect [address ip-address | username user-name | console | telnet | ftp | ssh |
netconf]
Context admin
Description This command disconnects a user from a session.
Disconnect without any parameters will disconnect the session in which the command was executed.
If any of the session type options (for example, console, telnet, FTP, SSH) are specified, then only the
respective sessions are affected.
If no session type options are specified, then all sessions from the IP address or from the specified user
are disconnected.
Any task that the user is executing is terminated. FTP files accessed by the user will not be removed.
A major severity security log event is created specifying what was terminated and by whom.
Default
none — No disconnect options are configured.
Parameters
address ip-address — The IP address to disconnect, specified in dotted decimal notation.
username user-name — The name of the user.
console — Disconnects the console session.
telnet — Disconnects the Telnet session.
ftp — Disconnects the FTP session.
Basic System Configuration Guide
cflash-id
Note: Ipv6 is supported on the 7750 SR and 7950 XRS.
Values
ipv4-address
ipv6-address
interface - 32 chars max, for link local addresses 255
cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|cf3:|cf3-A:|cf3-B:
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
System Management
409