Alcatel-Lucent 7450 Basic System Configuration Manual page 545

Other notes (which are also relayed to the operator when the test is attempted):
Output
Sample Output
*A:Dut-A# tools perform system inter-chassis sfm-interco-test
WARNING: This test is intended for an out-of-service standalone chassis that is
going to later become the extension chassis of an XRS-40 system.
At the start of the test, all provisioned IOMs will be reset and will be held
in the 'booting' state until the test has completed.
While the test is running avoid altering this system or the attached system
(e.g. do not shutdown, clear, or remove the CPMs/SFMs/IOMs and do not issue
CPM switchovers)
Once testing has completed all SFMs in this system will be cleared.
Do you wish to proceed (y/n)? y
Clearing provisioned IOMs ...
Test executing ...
Displaying results
===============================================================================
SFM Interconnect Port Summary
===============================================================================
SFM
-------------------------------------------------------------------------------
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
Basic System Configuration Guide
The test is already in-progress in another session
• All provisioned XCMs will be reset at the start of the test and will be held in the booting state
until the test has completed.
• All SFMs will be cleared when the operator exits the test. This will trigger a reset of the
XCMs and the standby CPM.
SFM IcPort
Oper State Num
up 1
up 2
up 3
up 4
up 5
up 6
up 7
up 8
up 9
up 10
up 11
up 12
up 13
up 14
up 1
up 2
up 3
up 4
IcPort Module
Oper State Inserted
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
up yes
System Management
Degrade Miscon Info
State SFM IcPort
none
none
none
none
none
none
none
none
none
none
none
none
none
none
none
none
none
none
545