Command Descriptions; Bof Show Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

BOF Show Command Reference

Command Descriptions

BOF Show Commands

The command outputs in the following sections are examples only; actual displays may differ
depending on supported functionality and user configuration.
bof
Syntax bof [cflash-id | booted]
Context show
Description This command displays the Boot Option File (BOF) executed on last system boot or on the specified
device.
If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified
since the system boot, a message displays.
Parameters
cflash-id — The cflash directory name. The slot name is not case-sensitive. Use upper or
booted — Displays the boot option file used to boot the system.
Output
Show BOF Fields
The following table describes BOF output fields.
226
lowercase "A" or "B" for the slot name.
Values
cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
Label
primary-image
primary-config
primary-dns
secondary-image
secondary-config
secondary-dns
Table 28: Show BOF Output Fields
Description
The primary location of the directory that contains the runtime images
of both CPM and XCM/IOM.
The primary location of the file that contains the configuration.
The primary DNS server for resolution of host names to IP addresses.
The secondary location of the directory that contains the runtime
images of both CPM and XCM/IOM.
The secondary location of the file that contains the configuration.
The secondary DNS server for resolution of host names to IP addresses.
Basic System Configuration Guide