Alcatel-Lucent 7450 Basic System Configuration Manual page 542

Show, Clear, Debug, and Tools Command Reference
Parameters all — Keyword to display all system resource usage information, as well as resource usage
system-resources
Syntax system-resources slot-number
Context tools>dump
Description
The system-resources command has been deprecated and replaced by the tools>dump>resource-
usage command. The system-resources command continues to be supported in the current release, but
it is recommended to use the resource-usage command instead.
This command displays system resource information.
Default none
Parameters slot-number — Specifies a specific slot to view system resources information.
set-role
Syntax set-role {standalone | master | extension}
Context tools>perform>chassis
Description This command sets the role of the 7950 XRS chassis from which the command is invoked.
WARNING: You are about to provision the chassis as an XRS-40 Extension chassis.
This chassis will immediately reboot after the command is executed. No CLI shell is
available directly on an Extension chassis. An Extension chassis will not completely
chassis. Do you wish to proceed (yes/no) ?
WARNING: You are about to provision the chassis as an XRS-
40 Master chassis. This chassis will immediately reboot after the command is
execute
Do you wish to proceed (yes/no) ?
542
information for all cards, FPs, and MDAs in the system.
• When run on a standalone chassis this will update the EEPROM on the (one) Chassis
backplane.
• Master and Extension chassis are blocked if any SFMs are configured as type sfm-x20 (must
be sfm-x20-b). The following message displays:
• When the extension option is specified, the chassis will immediately reboot as part of the
command. The following warning and prompt will be provided:
boot up unless it is properly cabled to and controlled by an XRS-40 Master
• When the master option is specified, the chassis will immediately reboot as part of the
command. The Operational mode is not changed until a reboot is performed. The following
warning and prompt will be provided:
Basic System Configuration Guide