Alcatel-Lucent 7450 Basic System Configuration Manual page 131

Parameters ospf-instance — Specifies the OSPF instance.
ospf3
Syntax ospf3
Context monitor>router
Description
This command enables the context to configure monitor commands for the OSPF3 instance and applies
to the 7750 SR or 7950 XRS.
interface
Syntax interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context monitor>router>ospf
monitor>router>ospf3
Description
This command displays statistics for OSPF interfaces at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the OSPF interface(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
interface — Specify IP address of the interface (ip-address) or interface name (ip-int-name). Up
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
Basic System Configuration Guide
Values
1 to 31
to 5 interfaces can be specified. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
Default
5 seconds
Values 3 to 60
Default 10
Values
1 to 999
processing. No calculations are performed on the delta or rate statistics.
CLI Usage
131