Alcatel-Lucent 7450 Basic System Configuration Manual page 101

Parameters port-id — Specifies up to 5 port IDs.
atm — Keyword specifying ATM information.
interface-connection — Monitors ATM interface statistics.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
aal-5 — Displays ATM Adaptation Layer 5 (AAL5) information.
ilmi — Monitors ATM ILMI statistics.
pvc — Identifies the port by the PVC identifier (vpi/vci).
pvp — Identifies the port by the permanent virtual path.
pvt — Identifies the port by the permanent virtual tunnel.
Basic System Configuration Guide
Values
port-id slot/mda/port [.channel]
eth-sat-id
pxc-id
aps-id
bundle ID
Default 5 seconds
Values
3 to 60
Default
10
Values 1 to 999
processing. No calculations are performed on the delta or rate statistics.
Default
Default mode delta
instead of the delta.
Default
Default mode delta
esat-id/slot/port
esat keyword
id 1 to 20
pxc-id.sub-port
pxc keyword
id 1 to 64
sub-port a, b
aps-group-id[.channel]
aps keyword
group-id 1 to 64
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 to 128
CLI Usage
101