Alcatel-Lucent 7450 Basic System Configuration Manual page 103

Ethernet service switch /service router /extensible routing system
Hide thumbs Also See for 7450:
Table of Contents

Advertisement

interval — seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
port
Syntax
port port-id vport name monitor-threshold [interval seconds] [repeat repeat]
Context
monitor>qos
Description
This command monitors VPORT statistics.
Parameters
port port-id — Specifies the port ID.
vport name — Displays statistics for the named VPORT.
monitor-threshold — Displays the exceed-count for the port-scheduler for the named VPORT.
interval — seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
scheduler-stats
Syntax
scheduler-stats
Context
monitor>qos
Description
This command enables the context to configure monitor commands for scheduler statistics.
Basic System Configuration Guide
Default
11 seconds
Values
11 to 60
Default
10
Values
1 to 999
processing.
No calculations are performed on the delta or rate statistics.
Values
slot/mda/port [.channel]
esat-id/slot/port
pxc-id.sub-port
Default
11 seconds
Values
11 to 60
Default
10
Values
1 to 999
CLI Usage
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

77507950

Table of Contents