Alcatel-Lucent 7450 Basic System Configuration Manual page 155

delete
Syntax delete [line]
Context candidate
Description
This command deletes the selected CLI node (which includes all sub-branches). The deleted lines are
also copied into a temporary buffer that can be used for a subsequent insert.
Parameters line — Indicates which line to delete.
discard
Syntax discard [now]
Context candidate
Description
This command deletes the entire contents of the candidate configuration and exits the edit-cfg mode.
Undo cannot be used to recover a candidate that has been discarded with candidate discard.
Parameters now — Avoids a confirmation prompt for the discard.
goto
Syntax goto line
Context candidate
Description This command changes the edit point of the candidate configuration. The edit point is the point after
which new commands are inserted into the candidate configuration as an operator navigates the CLI
and issues commands in edit-cfg mode.
Parameters line — Indicates which line to change starting at the point indicated by the following options.
Basic System Configuration Guide
Values
line, offset, first, edit-point last
Values
line, offset, first, edit-point last
line
offset
first
edit-point
last
line
Absolute line number.
Relative line number to current edit
point. Prefixed with '+' or '-'
Keyword - first line
Keyword - current edit point
Keyword - last line that is not 'exit'
Absolute line number.
CLI Usage
155