Dns Configuration Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

BOF Configuration Command Reference
mask — The subnet mask, expressed as an integer or in dotted decimal notation.
next-hop ip-address — The next hop IP address used to reach the destination.

DNS Configuration Commands

dns-domain
Syntax dns-domain dns-name
no dns-domain
Context bof
Description
This command configures the domain name used when performing DNS address resolution. This is a
required parameter if DNS address resolution is required. Only a single domain name can be
configured. If multiple domain statements are configured, the last one encountered is used.
The no form of the command removes the domain name from the configuration.
Default
no dns-domain — No DNS domain name is configured.
Parameters dns-name — Specifies the DNS domain name up to 32 characters in length.
primary-dns
Syntax primary-dns ip-address
222
ip-prefix/ip-prefix-length
ip-address
Values
1 to32 (mask length), 128.0.0.0 to255.255.255.255 (dotted
decimal)
ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-le 0 to32
ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
ipv6-prefix-le 0 to128
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
Basic System Configuration Guide