Alcatel-Lucent 7450 Basic System Configuration Manual page 368

System Command Reference
rmon-event-type rmon-event-type — Specifies the type of notification action to be taken when
alarm-type — Specifies the alarm that may be sent when this alarm is first created. If the first
Configuration example
cflash-cap-warn-pct cf1-B: rising-threshold 70 falling-threshold 60
interval 240 rmon-event-type trap start-alarm either
kb-memory-use-alarm
Syntax kb-memory-use-alarm rising-threshold threshold [falling-threshold threshold] interval
seconds [rmon-event-type] [startup-alarm alarm-type]
no kb-memory-use-warn
Context config>system>thresholds
Description
This command configures memory use, in kilobytes, alarm thresholds.
The no form of the command removes the parameters from the configuration.
Default
none
368
this event occurs.
Values log — An entry is made in the RMON-MIB log table for each
event occurrence. This does not create a TiMOS logger entry. The
RMON-MIB log table entries can be viewed using the
show>system>thresholds CLI command.
trap — A TiMOS logger event is generated. The TiMOS logger
utility then distributes the notification of this event to its
configured log destinations, which may be CONSOLE, telnet
session, memory log, cflash file, syslog, or SNMP trap
destinations logs.
both —Both an entry in the RMON-MIB logTable and a TiMOS
logger event are generated.
none — No action is taken.
Default both
sample is greater than or equal to the rising threshold value and startup-alarm is equal to
rising or either, a single rising threshold crossing event is generated.
If the first sample is less than or equal to the falling threshold value and startup-alarm is
equal to falling or either, a single falling threshold crossing event is generated.
Values rising, falling, either
Default
either
Basic System Configuration Guide