Alcatel-Lucent 7450 Basic System Configuration Manual page 356

System Command Reference
tertiary-location
Syntax tertiary-location file-url
no tertiary-location
Context config>system>software-repository
Description
This command configures the tertiary location for the files in the software repository. See the
software-repository
The no form of the command removes the tertiary location.
Parameters
file-url — Specifies the tertiary location to be used to access the files in the software repository.
356
remote-url [{ftp://} login:pswd@remote-locn/][file-path]
243 characters maximum
directory length 99 characters maximum each
remote-locn
ipv4-address
ipv6-address
cflash-id cf1:, cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
command description for more information.
Values
file url local-url | remote-url
local-url [cflash-id/][file-path]
remote-url [{ftp://} login:pswd@remote-locn/][file-path]
243 characters maximum
directory length 99 characters maximum each
remote-locn
ipv4-address
ipv6-address
[hostname | ipv4-address | [ipv6- address]]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 characters max, for link local
addresses
200 chars maximum, including cflash-id
directory length 99 characters maximum each
[hostname | ipv4-address | [ipv6- address]]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 characters max, for link local
addresses
Basic System Configuration Guide