Alcatel-Lucent 7450 Basic System Configuration Manual page 125

===============================================================================
A:ALA-12>monitor>router>mpls#
lsp-egress-statistics
Syntax lsp-egress-stats lsp-name [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>mpls
Description
This command displays egress statistics for LSP interfaces at the configured interval until the
configured count is reached.
Default
no lsp-egress-statistics
Parameters
repeat repeat — Specifies how many times the command is repeated.
interval seconds — Specifies the interval for each display, in seconds.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
Output
Sample Output
B:Dut-C-cpm2# monitor router mpls lsp-egress-stats sample repeat 3 interval 10
absolute
===============================================================================
Monitor egress statistics for MPLS LSP "sample"
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
LSP Name
-------------------------------------------------------------------------------
Collect Stats : Enabled
Adm State
FC BE
InProf Pkts
InProf Octets : 0
FC L2
InProf Pkts
InProf Octets : 0
FC AF
InProf Pkts
Basic System Configuration Guide
Received : Pkts - 0
Values 10
Values
1 to 999
Values
10
Values
3 to 60
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
: sample
: Up
: 0
: 0
: 551
Octets - 0
Accting Plcy. : 5
PSB Match : True
OutProf Pkts : 551
OutProf Octets: 560918
OutProf Pkts : 551
OutProf Octets: 560918
OutProf Pkts : 0
CLI Usage
125