Alcatel-Lucent 7450 Basic System Configuration Manual page 149

repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
base — Monitor base statistics.
ingress-queue-id ingress-queue-id — Monitors statistics for this queue.
egress-queue-id egress-queue-id — Monitors statistics for this queue.
Output
Sample Output
A:Dut-A# monitor service subscriber alcatel_100 sap 1/2/1:101 sla-profile sla_
default
===============================================================================
Monitor statistics for Subscriber alcatel_100
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
SLA Profile Instance statistics
-------------------------------------------------------------------------------
Off. HiPrio
Off. LowPrio
Off. Uncolor
Queueing Stats (Ingress QoS Policy 1000)
Dro. HiPrio
Dro. LowPrio
For. InProf
For. OutProf
Queueing Stats (Egress QoS Policy 1000)
Dro. InProf
Dro. OutProf
For. InProf
For. OutProf
-------------------------------------------------------------------------------
SLA Profile Instance per Queue statistics
-------------------------------------------------------------------------------
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio
Off. LowPrio
Basic System Configuration Guide
Default
10
Values 1 to 999
processing. No calculations are performed on the delta or rate statistics.
Default
mode delta
instead of the delta.
Values 1 to 32
Values 1 to 8
Packets
: 0
: 94531
: 0
: 0
: 7332
: 0
: 87067
: 880
: 0
: 90862
: 0
Packets
: 0
: 0
Octets
0
30704535
0
0
2510859
0
28152288
127660
0
12995616
0
Octets
0
0
CLI Usage
149