Chapter 1 Configuring Ethernet Ports; Ethernet Port Defaults - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring Ethernet Ports

Ethernet Port Defaults

The following table shows Ethernet port default values:
Parameter Description
Interface Line Speed
Interface Duplex Mode
Trap Port Link Messages
Interface Configuration
Peak Flood Rate Configuration
Interface Alias
Maximum Frame Size
Digital Diagnostics Monitoring
(DDM)
Enhanced Port Performance
(EPP)
Beacon LED
Precision Time Protocol (PTP)
time stamping on the switch
OmniSwitch AOS Release 8 Network Configuration Guide
Command
interfaces speed
interfaces duplex
interfaces link-trap
interfaces
interfaces flood-limit
interfaces alias
interfaces max-frame-
size
interfaces ddm
interfaces
interfaces beacon
interfaces ptp admin-
state
December 2017
Ethernet Port Defaults
Default Value/Comments
AutoNeg
AutoNeg
Disabled
Enabled
4 Mbps (10M Ethernet)
49 Mbps (100M Ethernet)
496 Mbps (1G Ethernet)
700 Mbps (2.5G Ethernet)
997 Mbps (10G Ethernet)
997 Mbps (40G Ethernet)
997 Mbps (100G Ethernet)
None configured
1553 (untagged) Ethernet packets
1553 (tagged) Ethernet packets
9216 Gigabit Ethernet packets
Disabled
Disabled
Disabled
Disabled
page 1-2