Calculate[1|2]:Gain[:Magnitude] <Numeric_Value - HP E4418B Programming Manual

CALCulate[1|2]:GAIN[:MAGNitude] <numeric_value>
This command is used to enter a value for the display offset on the
specified window. The display offset is applied to the measurement signal
after any math calculation.
Entering a value using this command automatically turns the
CALCulate[1|2]:GAIN:STATe command to ON.
Syntax
CALC
Parameters
Item
numeric_value
Example
Reset Condition
On reset, the display offset is set to 0 dB (DEF).
HP E4418B/E4419B Programming Guide
1 :GAIN
2
Description/Default
A numeric value. The default value, DEF,
is 0 dB. The value for MIN is -100.000 dB.
The value for MAX is +100.000 dB.
CALC2:GAIN 20
CALCulate[1|2]:GAIN[:MAGNitude] <numeric_value>
Space
:MAGN
?
This command enters a display
offset of 20 dB to the lower
window.
CALCulate Subsystem
numeric_value
DEF
MIN
MAX
Space
MIN
MAX
Range of Values
-100.000 to
+100.000 dB
DEF
MIN
MAX
3-5