STATus Subsystem
Operation Register Sets
Operation Register Sets
The following registers contain information which is part of the power
meters normal operation. The contents of the individual registers of these
register sets may be accessed by appending the commands listed in
"Status Register Set Commands".
The following command descriptions detail the SCPI register you require
to control but do not detail the Register Set commands.
The seven Operation Register Sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:SENSe[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
10-10
HP E4418B/E4419B Programming Guide