HP E4418B Programming Manual page 144

Example
Reset Condition
On reset,
HP E4418B/E4419B Programming Guide
CONF2?
• the command function is set to :POWer:AC.
• the expected power level is set to +20 dBm.
• the resolution is set to 3.
• the source list
on the HP E4418B is set to channel A on both windows.
on the HP E4419B is set to channel A on the upper window
and channel B on the lower window.
MEASurement Instructions
CONFigure[1|2]?
This command queries the current
configuration of the lower window.
2-7