HP E4418B Programming Manual page 265

MEMory Subsystem
MEMory Subsystem
MEMory Subsystem
The MEMory command subsystem is used to edit and review sensor
calibration tables, frequency dependent offset tables and save/recall
registersj. This facility can be used to store sensor calibration tables for
the HP 8480 series power sensors, and frequency dependent offset tables
which compensate for your test setup. The tables remain stored in the
power meter's memory during power down. The power meter is capable of
storing 20 sensor calibration tables and 10 frequency dependent offset
tables of 80 frequency points each.
The power meter automatically downloads the HP E-series power sensors
calibration tables. These tables cannot be reviewed or edited.
This subsystem is also used to create and review save/recall registers.
Keyword
MEMory
7-2
:CATalog
[:ALL]?
:STATe?
:TABLe?
:CLEar
[:NAME]
:TABLe
:FREE
[:ALL]?
:STATe?
:TABLe?
:NSTates?
:STATe
:CATalog?
:DEFine
:TABLe
:FREQuency
:POINts?
:GAIN
[:MAGNitude]
:POINts?
:MOVE
:SELect
Parameter Form
<string>
<string>
[,<numeric_value>]
<numeric_value>
[,<numeric_value>]
<numeric_value>
[,<numeric_value>]
<string>,<string>
<string>
HP E4418B/E4419B Programming Guide
Notes Page
[query only] page 7-4
[query only] page 7-6
[query only] page 7-7
[no query], page 7-10
[non-SCPI]}
[no query] page 7-11
[query only] page 7-13
[query only] page 7-14
[query only] page 7-15
[query only] page 7-16
[query only] page 7-18
[non-SCPI] page 7-19
page 7-22
[query only] page 7-25
[non-SCPI] page 7-26
[query only], page 7-28
[non-SCPI]
[no query], page 7-29
[non-SCPI]
[no query], page 7-30
[non-SCPI]