SENSe Subsystem
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe <Boolean>
Query Example
Error Message
If you attempt to set this command to ON and no table has been selected
using the
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:[SELect]
command then error -221, "Settings conflict" occurs and
[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe remains
OFF.
9-18
SENS2:CORR:CSET1:STAT?
This command queries whether
there is currently an active sensor
calibration table for channel B.
HP E4418B/E4419B Programming Guide