SENSe Subsystem
[SENSe[1]]|SENSe2:LIMit:CLEar[:IMMediate]
[SENSe[1]]|SENSe2:LIMit:CLEar[:IMMediate]
This command is used to immediately clear the FCO (fail counter) of any
limit failures for the specified channel. The FCO is used to determine the
results returned by the [SENSe[1]]|SENSe2:LIMit:FAIL? query.
Syntax
Example
9-42
:
SENS
1
SENS2
SENS2:LIM:CLE:IMM
:
CLE
LIM
This command clears the FCO for
channel B.
HP E4418B/E4419B Programming Guide
:IMM