HP E4418B Programming Manual page 421

TRIGger Subsystem
TRIGger Subsystem
TRIGger Subsystem
The TRIGger subsystem is used to synchronize device actions with events.
The TRIGger subsystem includes the ABORt, INITiate and TRIGger
commands. These are all at the root level in the command hierarchy but
they are grouped here because of their close functional relationship.
Further information on triggering is detailed in "Triggering the Power
Meter", on page 1-61.
The numeric suffix of the TRIGger program mnemonic in the TRIGger
commands refers to a channel, that is TRIGger1 and TRIGger2 represent
channel A and channel B respectively. If you are using the single channel
HP E4418B power meter the TRIGger2 commands are irrelevant and
cause the error "Header suffix out of range."
12-2
Keyword
ABORt[1|2]
INITiate[1|2]
:CONTinuous
[:IMMediate]
TRIGger[1|2]
:DELay
:AUTO
[:IMMediate]
:SOURce
Parameter Form
<Boolean>
<Boolean>
BUS|IMMediate|HOLD
HP E4418B/E4419B Programming Guide
Notes Page
[no query] page 12-3
page 12-5
[no query] page 12-5
page 12-9
[no query] page 12-11
page 12-12