HP E4418B Programming Manual page 400

Query
SYSTem:COMMunicate:SERial:TRANsmit:BAUD? MIN|MAX
The query returns the current setting of the transmit/receive baud rate or
the values associated with MIN and MAX.
Query Example
Error Message
If the baud rate is not in the range of values shown in the parameter table,
then the error message -224, "Illegal parameter value" will occur.
HP E4418B/E4419B Programming Guide
SYSTem:COMMunicate:SERial:TRANsmit:BAUD <numeric_value>
SYST:COMM:SER:TRAN:BAUD?
SYSTem Subsystem
This command queries the setting
of the transmit/ receive baud rate.
11-17