HP E4418B Programming Manual page 366

:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition Register of the SCPI
Register Set you require to control. The first 15 bits of the input
parameter are written into the Positive Transition Register of the SCPI
Register Set concerned. The last bit (bit 15) is always set to 0.
Refer to "Status Reporting", on page 1-71 for a general description of the
status register model.
Syntax
Parameters
Type
NRf
non-decimal numeric
Query
:PTRansition?
The query returns a 15 bit decimal-weighted number representing the
contents of the Positive Transition Register of the SCPI register set being
queried. The format of the return is <NR1> in the range of 0 to 32767
(2
HP E4418B/E4419B Programming Guide
space
:PTR
15
-1).
Status Register Set Commands
NRf
non-decimal numeric
?
Description
The value used to set the
PTR Register.
STATus Subsystem
Range of Values
16
0 to 2 -1
10-7