DISPlay Subsystem
DISPlay[:WINDow[1|2]]:SELect
DISPlay[:WINDow[1|2]]:SELect
This command is used to determine which window is currently selected.
Syntax
Example
Reset Condition
On reset, the upper window is selected.
Query
DISPlay[:WINDow[1|2]]:SELect?
The query enters a 1 or 0 into the output buffer indicating whether the
window specified is currently selected.
Query Example
5-16
DISP
:WIND
DISP:WIND2:SEL
•
1 is returned if the specified window is selected.
•
0 is returned if the specified window is not selected.
DISP:SEL?
1
:SEL
?
2
This command selects the lower
window.
This command queries whether or
not the upper window is selected.
HP E4418B/E4419B Programming Guide