Query
[SENSe[1]]|SENSe2:AVERage:SDETect?
The query enters a 1 or 0 into the output buffer indicating the status of
step detection.
Query Example
HP E4418B/E4419B Programming Guide
•
1 is returned when step detection is enabled.
•
0 is returned when step detection is disabled.
SENS:AVER:SDET?
[SENSe[1]]|SENSe2:AVERage:SDETect <Boolean>
This command queries whether
step detection is on or off.
SENSe Subsystem
9-11