Memory:table:move <String>,<String - HP E4418B Programming Manual

MEMory:TABLe:MOVE <string>,<string>
This command is used to rename a sensor calibration table or a frequency
dependent offset table.
Syntax
Parameters
Example
MEM:TABL:MOVE "tab1","tab1a"
Error Messages
If either table name is invalid, error -224, "Illegal parameter value"
occurs.
If the first parameter does not match an existing table name, error -256,
"File name not found" occurs.
If the second parameter matches an existing table name or save/recall
register, error -257, "File name error" occurs.
HP E4418B/E4419B Programming Guide
:TABL
MEM
Item Description/Default
string A string containing the existing table
(1st parameter) name.
string A string detailing the new table
(2nd parameter) name. A maximum of 12 characters
can be used.
MEMory:TABLe:MOVE <string>,<string>
Space
:MOVE
This command renames a table
named tab1 to tab1a.
MEMory Subsystem
,
string string
Range of Values
existing table
name
A to Z (uppercase)
a to z (lowercase)
0 - 9
_ (underscore)
7-29