HP E4418B Programming Manual page 295

OUTput Subsystem
OUTPut Subsystem
OUTPut Subsystem
The OUTPut command subsystem is used to switch on and off the
POWER REF output and control the rear panel TTL outputs. The.TTL
Outputs can be used to determine when a predefined limit in either, or
both, windows has been exceeded.
8-2
Keyword
OUTPut
:ROSCillator
[:STATe]
:TTL[1|2]
:ACTive
:FEED
:STATe
Parameter Form
<Boolean>
HIGH|LOW
<String>
<Boolean>
HP E4418B/E4419B Programming Guide
Notes Page
page 8-3
page 8-4
page 8-5
page 8-7