The Calculate[1|2]:Gain Node - HP E4418B Programming Manual

CALCulate Subsystem

The CALCulate[1|2]:GAIN Node

The CALCulate[1|2]:GAIN Node
This node is used to enter and enable a display offset on the specified
window. The display offset is applied to the measurement signal after any
math calculation.
The commands associated with this block are:
CALCulate[1|2]:GAIN[:MAGNitude] <numeric value>
CALCulate[1|2]:GAIN:STATe <Boolean>
3-4 HP E4418B/E4419B Programming Guide