System:communicate:serial[:Receive]:Bits <Numeric_Value - HP E4418B Programming Manual

SYSTem:COMMunicate:SERial[:RECeive]:BITs <numeric_value>
This command sets the word length for both the receiver and the
transmitter. The word length for the receiver and transmitter are tied
together and can either be set by this command or the equivalent
transmitter command :TRANsmit:BITs.
Syntax
SYST
Parameters
Example
Reset Condition
On reset, the word length is unaffected.
Query
SYSTem:COMMunicate:SERial[:RECeive]:BITs?
The query returns the current setting of the receive/transmit word length.
HP E4418B/E4419B Programming Guide
SYSTem:COMMunicate:SERial[:RECeive]:BITs <numeric_value>
:COMM :SER
Item Description/Default
numeric_value A numeric value for the word length
SYST:COMM:SER:REC:BIT 8
Space
:REC :BIT
This command sets the receiver
and transmitter word length to 8.
SYSTem Subsystem
numeric_value
?
Range of
Values
7 or 8
11-9