Show Cdp Forward - Cisco Catalyst 3750-X Command Reference Manual

show cdp forward

show cdp forward
To display the CDP forwarding table, use the show cdp forward user EXEC command.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description
entry
forward
interface interface-id
neighbor
traffic
Command Modes
Use EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
The show cdp forward command output shows the number of CDP packets forwarded on each
ingress-port- to-egress-port mapping and the statistics for forwarded and dropped packets.
Examples
Switch# show cdp forward
Ingress
Port
-------------------------------------------------------------
Gi2/0/2
Related Commands Command
cdp forward
Catalyst 3750-X and 3560-X Switch Command Reference
2-578
show cdp forward [entry | forward | interface interface-id | neighbor | traffic]
(Optional) Displays information about a specific neighbor entry.
(Optional) Displays the CDP forwarding information.
(Optional) Displays the CDP interface status and configuration.
(Optional) Displays the CDP neighbor entries.
(Optional) Displays the CDP statistics.
Modification
This command was introduced.
Egress
Port
Gi2/0/13
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
# packets # packets
forwarded dropped
0 0
Description
Configures the ingress and egress switch ports for CDP
traffic.
OL-29704-01