Figure 51: Removing Power Supply from an ACX5048
Figure 52: Removing Power Supply from an ACX5096
SEE ALSO
AC Power Supply for an ACX5000 Router | 65
DC Power Supply for an ACX5000 Router | 69
Installing a Power Supply in an ACX5000 Router
The power supplies in an ACX5000 router are hot-removable and hot-insertable field-replaceable units
(FRUs): you can remove and replace them without powering off the router or disrupting routing functions.
Before you install a power supply in a ACX5000 router, ensure that you have taken the necessary
precautions to prevent electrostatic discharge (ESD) damage (see
Damage" on page
196).
Ensure that the airflow direction of the power supply is the same as the chassis. Labels on the power
supply handle indicate the direction of airflow. See
on page 60
for more information.
To install a power supply in an ACX5000 router (see
"Prevention of Electrostatic Discharge
"Cooling System and Airflow in an ACX5000 Router"
Figure 53 on page 139
and
Figure 54 on page
139):
138