Modifying an MPLS LSP
Some MPLS LSP parameters such as primary and secondary, must be shut down before they
can be edited or deleted from the configuration.
The following displays a MPLS LSP configuration example. Refer to the LSP configuration
on
A:ALA-1>>config>router>mpls>lsp# info
----------------------------------------------
----------------------------------------------
A:ALA-1>config>router>mpls#
7450 ESS MPLS Guide
page
179.
shutdown
to 10.10.10.104
from 10.10.10.103
rsvp-resv-style ff
include "red"
exclude "green"
fast-reroute one-to-one
exit
primary "to-NYC"
hop-limit 50
exit
secondary "secondary-path"
exit
MPLS and RSVP
Page 187